Philips Stereo System OTT2000 User Manual

Always there to help you

www.philips.com/welcome

OTT2000

Question?

Contact

Philips

User manual

About Bluetooth connection

2 Y o ur classic micro sound system

Introduction

10 Notice

What's in the box

Overview of the product

Compliance

Care for your product

Care of the environment

T r ademark notice

3 Get started

Connect power

Prepare remote control

Play from a Bluetooth device

USB record

5 Listen to FM radio stations

Search for a radio station automatically 14

Program radio stations automatically

Program radio stations manually

Select stereo/mono broadcast

6 Listen to an external device

8 Product information

Speciﬁcations

USB playability information

Supported MP3 disc formats

•

Never insert objects into the ventilation

slots or other openings on the product.

Where the mains plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

Disconnect the product from the power

outlet before lightning storms.

When you disconnect the power cord,

always pull the plug, never the cable.

Never remove the casing of this product.

1 Safety

Read and understand all instructions before you

use this product. If damage is caused by failure

to follow the instructions, the warranty does

not apply.

•

Safety

Risk of short circuit or ﬁre!

•

Warning

Before you connect the product to the

power outlet, make sure that the power

voltage matches the value printed on the

back of the product. Never connect the

product to the power outlet if the voltage

is different.

Never expose the product to rain, water,

sunshine, or excessive heat.

Avoid force coming onto power plugs.

Loose power plugs can cause arcing or ﬁre.

• Never remove the casing of this apparatus.

• Never lubricate any part of this apparatus.

• Never look into the laser beam inside this apparatus.

• Never place this apparatus on other electrical

equipment.

• Keep this apparatus away from direct sunlight, naked

ﬂames or heat.

• Ensure that you always have easy access to the power

cord, plug or adaptor to disconnect the apparatus from

the power.

•

The device shall not exposed to dripping

or splashing.

Risk of injury or damage to the product!

•

This product shall not be exposed to

dripping or splashing!

Do no place any source of danger on the

device (e.g. liquid ﬁlled objects. lit candles).

Where the MAINS plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

Make sure that there is enough free space

around the product for ventilation.

Only use attachments/accessories speciﬁed

by the manufacturer.

•

Do not place any sources of danger on this

product (e.g. liquid ﬁlled objects, lighted

candles).

•

Never place the product or any objects

on power cords or on other electrical

equipment.

If the product is transported in

temperatures below 5°C, unpack the

product and wait until its temperature

matches room temperature before

connecting it to the power outlet.

Only use attachments/accessories speciﬁed

by the manufacturer.

•

Risk of electric shock or ﬁre!

•

Never expose the product and accessories

to rain or water. Never place liquid

containers, such as vases, near the product.

If liquids are split on or into the product,

disconnect it from the power outlet

immediately. Contact Consumer Care to

have the product checked before use.

Never place the product and accessories

near naked ﬂames or other heat sources,

including direct sunlight.

•

Risk of overheating!

•

Never install this product in a conﬁned

space.Always leave a space of at least four

inches around the product for ventilation.

Make sure that curtains or other objects

never cover the ventilation slots on the

product.

•

Risk of swallowing coin battery!

•

The device may contain a coin/button

type battery, which can potentially be

swallowed. Keep the battery out of reach

of children at all times! If swallowed, the

battery can cause serious injury or death.

Severe internal burns can occur within two

hours of ingestion.

•

If you suspect that a battery has been

swallowed or placed inside any part of the

body, seek immediate medical attention.

When you change the batteries, always

keep all new and used batteries out of

reach of children. Make sure that the

battery compartment is completely secure

after you replace the battery.

•

If the battery compartment cannot be

completely secured, discontinue use of the

product. Keep out of reach of children and

contact the manufacturer.

Note

• The type plate is located on the back of the product.

2 Your classic

micro sound

system

Congratulations on your purchase, and

welcome to Philips!To fully beneﬁt from the

support that Philips offers, register your product

at www.philips.com/welcome.

Introduction

With this product, you can:

•

listen to vinyl records,

listen to FM radio stations,

listen to audio CDs,

listen to audio from an external device

through the AUDIO-IN socket,

listen to audio from an external device via

Bluetooth connection.

•

listen to audio from a USB storage device.

What's in the box

Check and identify the contents of the package:

a Main unit

b Short User manual

c Safety & Notice sheet

d AC power cord

e Remote control

Overview of the product

e SOURCE knob

Overview of the device

•

Select a source: CD, USB, FM, Phono/

Aux, or Bluetooth.

a Vinyl record platter

f AUDIO IN

•

Connect an external audio device.

•

Open/close the disc compartment.

REC

Record the track from disc/FM/Phono/

AUX/Bluetooth to a USB device.

Headphone socket.

USB socket.

•

Turn on the device, or switch to

Standby mode.

i Disc compartment

j Display panel

Overview of remote control

•

Show current status.

k IR sensor

•

Detect signals from the remote control

(always point the remote control

towards the IR sensor).

•

Skip to the previous/next track.

Tune to a radio station.

Press and hold the key to search within

a track in disc/USB source.

Adjust time.

•

Start or pause playback.

n VOLUME

•

Rotate the knob to adjust volume.

o +/-

•

Skip to the previous/next album.

Select a preset radio station.

a SOURCE

•

Select a source: CD, USB, FM, Phono/

Aux, or Bluetooth.

•

Stop play.

•

Erase a program.

•

Turn on the device, or switch to

Standby mode.

q power indicator

Lights when the unit is in standby

mode.

•

Skip to the previous/next track.

Tune to a radio station.

Press and hold the key to search within

a track in disc/USB source.

Adjust time.

r Arm rest

s Auto stop selector

t Speed selector

u Tone arm

•

v Bluetooth indicator

•

Skip to the previous/next album.

Select a preset radio station.

Adjust time.

•

Flashes when the unit is in paring

mode or connecting mode.

•

Lights when the unit is connected with

Bluetooth compatible device.

e CLOCK/PROG

•

Set clock in standby mode.

Program tracks in disc/USB source.

Program radio stations.

f SLEEP/TIMER

•

Set the sleep timer.

•

Set the alarm timer.

REC

•

Record the track from disc/FM/Photo/

AUX/Bluetooth to a USB device.

h FIND/FILE CUT

•

Search tracks by title or by folder name

in disc/USB source.

•

Press to cut the audio ﬁle when

recording audio ﬁles from Phono/

AUX/Bluetooth source to a USB

storage device.

i VOL +/-

•

Increase or decrease volume.

Mute or restore volume.

•

k INFO/DELETE

•

In disc/USB source, press to display the

playback information of .mp3 ﬁles.

Delete ﬁles from the USB storage

device.

•

l PLAY MODE/FM/ST/MO

•

In disc/USB source, select repeat play

mode.

In disc/USB source, select random play

mode.

In FM source, select stereo playback or

mono playback.

•

Stop playback.

Start or pause playback.

o DISPLAY

Display the time in any source mode.

•

3 Get started

Always follow the instructions in this chapter in

sequence.

Connect power

Connect the AC power cord to the AC

MAIN~ socket and then to the wall outlet.

Prepare remote control

Caution

• Risk of explosion! Keep batteries away from heat,

sunshine or ﬁre. Never discard batteries in ﬁre.

• Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Note

• Before pressing any function button on the remote

control, ﬁrst select the source with the remote control

and not the main unit.

• If the the remote control will not be used for an

extended period of time, remove the battery.

For ﬁrst-time use:

1 Remove the protective tab to activate the

remote control battery.

To replace the remote control battery:

1 Open the battery compartment.

2 Insert one CR2032 battery with correct

polarity (+/-) as indicated.

Turn on

3 Close the battery compartment.

Press .

» The product switches to the last

selected source.

•

To switch the product to standby

mode, press again.

Set the clock

1 ^{In standby mode, press CLOCK/PROG.}

2 Press

to select a time format, and

then press CLOCK/PROG to conﬁrm.

» Hour digits blink.

3 Press

to set the hour, and then

press CLOCK/PROG to conﬁrm.

» Minute digits blink.

4 Press

to the minute and then

press CLOCK/PROG to conﬁrm.

Program tracks

4 Play

Note

• You can program tracks only when the play stops.

• You can program a maximum of 20 tracks.

Play a disc

1 In playback stop mode, press CLOCK/

PROG to activate the program mode.

» [MEMORY] (memory is displayed on

the screen.

1 ^{Press SOURCE repeatedly to select CD}

source.

2 Press to open the disc compartment.

3 Insert a disc with the printed side facing up,

2 For MP3 tracks, press

to select an

and then close the disc compartment.

album.

4 Play starts automatically. If not, press

3 Press

to select a track, then press

CLOCK/PROG to conﬁrm.

4 Repeat steps 2 to 3 to program more

tracks.

5 Press

to play the programmed tracks.

To erase the program, in the stop

position, press

•

The program mode stops automatically

if no button is pressed for about 10

seconds.

Display play information

Pause/resume play

During playback, press and hold INFO.

•

During play, press

play.

to pause/resume

•

For CD:

•

Lap time of current track

Lap time remaining of current track

Total lap time of all tracks

Skip to a track

Total lap time remaining of all tracks

For CD:

•

For MP3 disc and USB: ID3 information,

such as [TITLE] (title), [ARTIST] (artist),

[ALBUM] (album).

•

Press

to select another track.

For MP3 disc and USB:

1 Press PRESET/ALBUM

to select an

album or a folder.

Search tracks

2 Press

to select a track or a ﬁle.

You can search a track by title or folder name

within a disc/USB.

Search within a track

1 During play, press and hold

Note

2 Release to resume normal play.

• For MP3 ﬁles, the bit rates from 32 kbps to 320 kbps

are supported.

10 EN

For CD/MP3: Search by title

2 Select the correct speed with the speed

selector.

1 In playback stop mode, press FIND/FILE

•

You can select speed 33 or speed 45

according to different vinyl type.

CUT once.

» The titles of all tracks are displayed in

alphabetical order.

3 Place the vinyl record on the turntable

platter.

2 Press

track title in alphabetical order.

start playback of the selected

to search for the desired

4 Lift the tone arm carefully and move it

towards the record.

3 Press

» The turntable platter starts rotating

automatically.

track.

For MP3: Search by folder

5 Gently lower the tone arm onto the edge

of the record to begin playback from the

beginning.

1 In playback stop mode, press FIND/FILE

CUT twice.

» The folders are displayed in

alphabetical order.

» Playback starts.

6 Adjust the volume to the desired level.

2 Press

to select a folder.

•

If AUTO STOP is set to ON, the

platter stops rotating automatically

after playback ﬁnishes.

3 Press

start play all the tracks in the

folder.

7 Put the tone arm securely back on the arm

Select repeat/shufﬂe play options

rest.

1 During play, press PLAY MODE/FM/ST/

MO to select a repeat option or the

shufﬂe play mode.

•

: Repeat the current track

: Repeat the current folder

(for MP3 disc)

•

: Repeat all

: Random play

2 To resume normal play, press PLAY

MODE/FM/ST/MO repeatedly until no

option is displayed.

Note

Play vinyl record

• The micro system automatically switches to AUX

source when there is an external device is connected

through the AUDIO IN socket.

Caution

• Remove the stylus protector before use.

• Place one vinyl record on the platter at a time.

• Keep 15 cm at least between the device and other

objects.

1 Press SOURCE repeatedly to select

PHONO/AUX source.

EN 11

Note

Play from USB

• Before you connect a Bluetooth device to the unit,

familiarize yourself with the Bluetooth capabilities of

the device.

Note

• Keep the unit away from other electronic devices that

may cause interference.

• Make sure that the USB storage device contains

playable audio content.

• The effective operation range between the unit and the

paired device is approximately 10 meters (30 feet).

• Any obstacle between the unit and the device can

reduce the operational range.

• Only MP3 ﬁles with bit rates from 32 kbps to 320 kbps

are supported.

• The USB socket does not support connections

with USB extension cables and is not designed for

communicate directly with a computer.

1 Press SOURCE repeatedly to select BT

source.

1 Push down the USB protective cover and

then insert a USB storage device into the

socket.

» The Bluetooth indicator ﬂashes blue.

2 Activate the Bluetooth function on your

Bluetooth device (see the device user

manual).

3 Select "PHILIPS OTT2000" on your device

for pairing.

4 After successful connection, the Bluetooth

indicator turns to solid blue.

5 Start music play on your Bluetooth device.

Tip

• If the micro system switches from a Bluetooth source

to another source, the connected Bluetooth device

disconnects automatically.

• The system can memorize up to 4 previously

connected Bluetooth devices.

2 Press SOURCE repeatedly to select USB

source.

» Play starts automatically. If not, press

USB record

•

To select a folder, press

To select an audio ﬁle, press

Audio CD tracks, MP3 discs,audio from vinyl

record and Bluetooth, radio, and audio from

external devices can be recorded as .mp3

format ﬁles to a USB storage device.

Play from a Bluetooth device

The ﬁrst time you record to the USB storage

device, a folder named 'PHILIPS OTT2000' is

automatically created in the USB storage device.

Each time you record, the recorded ﬁles are

stored to this folder.

You can listen to a Bluetooth device through

the micro system.

12 EN

Record to USB

Delete ﬁle from USB

Plug the USB storage device into the

socket of this device.

1 In playback stop mode, press SOURCE

repeatedly to select USB source.

1 Prepare the source to record from.

2 Press INFO/

DELETE.

•

Disc - Select the disc source and load a

disc.You can select a track from which

a recording starts.

» DEL -- 001 is displayed in the screen.

3 Press

to select the ﬁle to be

deleted.

4 Press DELETE to conﬁrm.

To exit ﬁle deletion mode, press

•

Radio -Tune to a radio station.

AUX IN - Select the Phono /Aux

source, then connect and start to play

an external device.

•

Phono - Select the Phono /Aux source,

then play the vinyl record.

Bluetooth - Select the Bluetooth

source and play the tracks.

2 Press

For CD discs, press

to select:

REC to start recording.

•

REC repeatedly

A [REC_ONE] (record one): the ﬁrst/

current track is recorded.

B [REC_ALL] (record all): all tracks/the

remaining tracks are recorded.

» Disc play starts automatically from the

beginning of the disc/the selected track,

and the recording starts.

•

To stop recording, press

Note

• If the USB storage device does not have enough

memory to store the audio ﬁles, a message about a full

memory is displayed.

• For CD disc, recording process is completed only when

the entire track is recorded.

• For MP3 discs, the system copies ﬁles to the USB

storage device if

REC is pressed.

Cut a ﬁle

When you record audio ﬁles from Bluetooth/

AUX/PHONO/FM to a USB storage device,

you can cut a ﬁle by pressing FIND/FILE CUT

during recording.A new audio ﬁle is generated

and recording continues.

EN 13

5 Listen to FM

radio stations

Program radio stations

manually

1 ^Press

to tune to a radio station.

2 Press CLOCK/PROG to activate the

1 Turn the SOURCE knob to select FM

programming.

source.

3 Press

to allocate a number to this

2 Search for radio stations automatically or

radio station.

manually.

4 Press CLOCK/PROG to conﬁrm.

» The radio station is stored with the

selected sequence number.

Note

• For optimal reception, fully extend the antenna and

adjust its position.

• You can store a maximum of 20 FM radio stations.

5 Repeat steps 1-4 to program more radio

stations.

Note

• If a radio station is stored over the sequence number

of a previously saved station, the earlier station will be

overwritten.

Search for a radio station

automatically

1 ^{Press and hold}

for more than 2

seconds.

» The radio automatically tunes to a

Select stereo/mono broadcast

station with strong reception.

To improve the reception of stations with weak

signals, monaural sound should be selected.

2 Repeat step 1 to tune to more stations.

» When a radio station with a strong

signal is detected, the search stops and

the radio station is broadcast.

•

In tuner source, press FM/ST/MO to select

a setting:

•

[STEREO]: stereo broadcast.

[MONO]: monaural broadcast.

Program radio stations

automatically

1 ^{Press CLOCK/PROG for more than 2}

seconds to activate automatic program

mode.

» All available stations are programmed

in the order of waveband reception

strength.

» The ﬁrst programmed radio station is

broadcast automatically.

Press

to select preset radio stations.

14 EN

6 Listen to an

external device

You can also listen to an external audio device,

for example, MP3 player, through this product.

1 Turn the SOURCE knob to select

PHONO/AUX mode.

2 Connect the audio in cable to

•

the AUDIO IN socket on the front

panel of this product, and

the headphone jack on the external

device.

•

3 Play the external device (refer to its user

manual).

EN 15

5 Press SLEEP/TIMER to conﬁrm.

7 Other features

» The hour digits begin to blink.

6 Press

to set the hour.

7 Press SLEEP/TIMER to conﬁrm.

» The minute digits begin to blink.

Set the sleep timer

8 Press

to set the minute.

9 Press SLEEP/TIMER to conﬁrm.

This micro sound system can automatically

switch to standby after a set period of time.

» The timer is set and activated.

•

When the micro system is turned on, press

SLEEP/TIMER repeatedly to select a set

period of time (in minutes).

Activate and deactivate the alarm

timer

•

[SLEEP -- 90]

[SLEEP -- 75]

[SLEEP -- 60]

[SLEEP -- 45]

[SLEEP -- 30]

[SLEEP -- 15]

[OFF]

1 Press to switch the micro system to

standby mode.

2 Press SLEEP/TIMER repeatedly to activate

or deactivate the timer.

» If the timer is activated, the display

shows

» When sleep timer is activated, [SLEEP]

» If the timer is deactivated, is not

is displayed.

shown on the display.

To deactivate sleep timer

•

Press SLEEP/TIMER repeatedly until

[SLEEP OFF] (sleep off) is displayed.

» When sleep timer is deactivated,

[SLEEP] disappears.

Note

• If DISC/USB source is selected and the track cannot be

played, tuner is automatically activated.

• The micro sound system automatically switches to

standby mode if no operation is performed within 30

minutes after the alarm source is activated.

Set the alarm timer

This micro system can be used as an alarm

clock.The disc, USB, or tuner is activated to play

at a preset time.

Adjust the volume

1 Press to switch the unit to standby

Turn the VOLUME knob to increase/decrease

volume.

mode.

2 Make sure that you have set the clock

correctly.

3 Press and hold SLEEP/TIMER.

» A prompt to select the source is

displayed.

4 Press SOURCE repeatedly to select a

source: CD, USB, or FM.

16 EN

Ampliﬁer

Rated Output Power

Frequency Response

8 Product

information

1.5 W x 2 RMS

60 Hz - 16 kHz,

±3 dB

Signal to Noise Ratio

Aux Input

> 65 dB

0.5V RMS 20 kohm

Note

• Product information is subject to change without prior

notice.

Speakers

Speaker Impedance

Speaker Driver

Sensitivity

4 ohm

2 X 3" full range

84 dB/m/W

Speciﬁcations

Bluetooth

General information

Communication

system

Output

Bluetooth Standard

version 2.1

Bluetooth Standard Power

Class 2

Line of sight approx. 10m

(30 feet)

AC Power Rating

Operation Power

Consumption

Standby power

consumption

220 - 240V~, 50 Hz

16 W

< 1 W

Maximum

communication

range

Dimensions

- Main Unit

Frequency band

2.4 GHz band (2.4000

GHz - 2.4835 GHz)

Advanced Audio

( W x H x D)

Weight (Main Unit)

335 x 311 x 169 mm

2.5 kg

Compatible

Bluetooth proﬁles Distribution Proﬁle

(A2DP)

Supported codecs

Tuner

Tuning Range

FM: 87.50 - 108.00

MHz;

50 kHz

- Receive

-Transmit

SBC (Sub Band Codec)

Not supported

Tuning grid

Total Harmonic

Distortion

< 2%

Signal to Noise Ratio

Number of preset

radio stations

> 50 dB

Vinyl

Supported vinyl size

7 inch

12inch

33/45

Speed

EN 17

USB playability information

Compatible USB devices:

•

USB ﬂash memory (USB 1.1 and USB 2.0)

USB ﬂash players (USB 1.1 and USB 2.0)

memory cards (requires an additional card

reader to work with this unit)

Supported formats:

•

USB or memory ﬁle format FAT12, FAT16,

FAT32 (sector size: 512 bytes)

MP3 bit rate (data rate): 32-320 Kbps and

variable bit rate

Directory nesting up to a maximum of 8

levels

•

Number of albums/ folders: maximum 99

Number of tracks/titles: maximum 999

ID3 tag v2.0 to v2.3

File name in Unicode UTF8 (maximum

length: 16 bytes)

Supported MP3 disc formats

•

ISO9660, Joliet

Maximum title number: 999 (depending on

ﬁle name length)

•

Maximum album number: 99

Supported sampling frequencies: 32 kHz,

44.1 kHz, 48 kHz

•

Supported Bit-rates: 32~320 (kbps),

variable bit rates

18 EN

9 Troubleshooting

About Bluetooth connection

Music playback is unavailable on this product

even after successful Bluetooth connection.

Warning

• Never remove the casing of this product.

•

The device cannot be used with this

product to play music.

To keep the warranty valid, never try to repair

the product yourself.

The audio quality is poor after connection

with a Bluetooth-enabled device.

If you encounter problems when using this

product, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips Web page (www.

philips.com/support).When you contact Philips,

make sure that the product is nearby and the

model number and serial number are available.

•

The Bluetooth reception is poor. Move the

device closer to this product or remove

any obstacle between.

Cannot connect with this product.

•

The device does not support the proﬁles

required for this product.

•

The Bluetooth function of the device is

not enabled. Refer to the user manual of

the device to ﬁnd out how to enable the

function.

General

No power

•

This product is not in the pairing mode.

This product is already connected with

another Bluetooth-enabled device.

Disconnect that device and then try again.

Press to restart the product or switch

the product to Bluetooth source again for

reconnection.

•

Make sure that the AC power cord is

properly connected.

•

Make sure that there is power at the AC

power outlet.

•

No sound

•

Adjust the volume.

When listening to an external device, make

sure that the external device is not muted.

The paired mobile device connects and

disconnects constantly.

•

The Bluetooth reception is poor. Move the

device closer to this product or remove

any obstacle between.

Some mobile phones may connect and

disconnect constantly when you make

or end calls.This does not indicate any

malfunction of this product.

For some devices, the Bluetooth

connection may be deactivated

automatically as a power-saving feature.

This does not indicate any malfunction of

this product.

No response from the product

•

Make sure that the power is available.

Turn off the product, and then turn it on

again.

•

Poor radio reception

•

Due to the interference from other

electrics or building obstacles, the signals

become weak. Move the product to a

place free of interference.

•

Make sure that the antenna is fully

extended.Adjust the position of the

antenna.

Clock/alarm setting is erased.

•

Power has been interrupted, or the AC

power adaptor has been disconnected.

Set the clock/alarm again.

•

EN 19

10 Notice

Care of the environment

Any changes or modiﬁcations made to this

device that are not expressly approved by

WOOX Innovations may void the user’s

authority to operate the equipment.

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

Compliance

When this crossed-out wheeled bin symbol is

attached to a product it means that the product is

covered by the European Directive 2002/96/EC.

Please inform yourself about the local separate

collection system for electrical and electronic

products.

Please act according to your local rules and

do not dispose of your old products with your

normal household waste. Correct disposal of

your old product helps to prevent potential

negative consequences for the environment and

human health.

This product complies with the radio

interference requirements of the European

Community.

Hereby,WOOX Innovations declares that this

product is in compliance with the essential

requirements and other relevant provisions

of Directive 1999/5/EC.You can ﬁnd the

Declaration of Conformity on www.philips.com/

support.

Your product contains batteries covered by

the European Directive 2006/66/EC, which

cannot be disposed with normal household

waste.Please inform yourself about the local

rules on separate collection of batteries

because correct disposal helps to prevent

negative consequences for the environmental

and human health.

This is CLASS II apparatus with double

insulation, and no protective earth provided.

Care for your product

Environmental information

•

Do not insert any objects other than discs

into the disc compartment.

Do not insert warped or cracked discs into

the disc compartment.

Remove the discs from the disc

compartment if you are not using the

product for an extended period of time.

Only use microﬁber cloth to clean the

product.

All unnecessary packaging has been omitted.We

have tried to make the packaging easy to separate

into three materials: cardboard (box), polystyrene

foam (buffer) and polyethylene (bags, protective

foam sheet.)

Your system consists of materials which can

be recycled and reused if disassembled by a

specialized company. Please observe the local

regulations regarding the disposal of packaging

materials, exhausted batteries and old equipment.

•

20 EN

Trademark notice

The Bluetooth® word mark and logos are

registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by WOOX

Innovations is under license.

reserved.

Speciﬁcations are subject to change without

notice.WOOX reserves the right to change

products at any time without being obliged to

adjust earlier supplies accordingly.

EN 21

Specifications are subject to change without notice

This product was brought to the market byWOOX

Innovations Limited or one of its affiliates, further referred

to in this document asWOOX Innovations, and is the

manufacturer of the product.WOOX Innovations is the

warrantor in relation to the product with which this booklet

was packaged. Philips and the Philips Shield Emblem are

registered trademarks of Koninklijke Philips N.V.

OTT2000_12_UM_V1.0

Peavey Portable Speaker Triple XXX 212 User Manual
Pelco Security Camera 1104 080 User Manual
Philips Battery Charger LR1PB2C User Manual
Philips Car Satellite TV System 32PFL3605 12 User Manual
Philips Cordless Telephone DECT2112S User Manual
Philips Digital Photo Frame SDJ6650 User Manual
Philips Portable Speaker SBC BM100 User Manual
Philips Stereo System FW C30 User Manual
Pioneer Stereo Receiver VSXAX2ASs User Manual
Poulan Trimmer 115248826 User Manual